Skip to main content

Free Shipping*. 24/7 Customer Service 888.866.8862.

FAQ for iOS and Android

See FAQs for old Rabbit Air app

A3 SPA-1000N

How do I connect my A3 SPA-1000N to my wireless home network?

Open tab

Watch the quick pairing video.

  1. You start by downloading the Rabbit Air 2 app from the app store on your Apple or Android device.
  2. Once you have downloaded and installed the app, you can log in using your Rabbit Air account username and password or create a new one.
  3. If this is your first time pairing your device, tap on connect and complete the network check. If you have already installed another air purifier, tap the add button (+) in the upper right-hand corner..
  4. The "Network Check" confirms you have everything needed to pair your air purifier.
  5. Select A3 air purifier.
  6. Next, pair your air purifier to your home wireless network using the Mobile setup or WPS method.

    A. Mobile Setup

    1. Tap and hold the Wireless Icon on the A3 control interface until the LED starts blinking.
    2. Wait 10 - 15 seconds or until the wireless light starts to blink slower.
    3. Select your WiFi Network

    B. WPS Setup

    1. Locate the WPS button on the home wireless router (Typically located on the side or back). Press on the WPS button on the router to activate the router's WPS pairing process.
    2. Tap and hold the Wireless Icon on the A3 control interface until the LED starts blinking.
  7. To complete setup, put in your air purifier's location and name.
  8. Select your desired digital skin to help distinguish your purifier
  9. Now you are ready to start using your air purifier through the Rabbit Air App! Please contact Rabbit Air support at 1.888.866.8862 or customerservice@rabbitair.com if there are any issues.

Why can't I find my home wireless network during setup?

Open tab

The A3 currently only supports 2.4Ghz signals. Also, if the router and air purifier are placed too far apart or blocked by thick walls, signal strength may be an issue. To avoid these issues, please set up the air purifier closer to the router.

How do I set up a schedule?

Open tab

You can set your air purifier to run on a daily schedule by turning it on the specific schedule. You have a high level of control within the individual schedules and can change the individual hours to a specific fan speed.

*Note the air purifier will turn off "Schedule" if any speed or mode is changed manually either on the app or on the physical device.

Go to your app and tap on the air purifier you want to set the schedule for. Multiple schedules that do not have overlapping times can be used for the same unit.

How does the light control function work?

Open tab

Using the Rabbit Air app, there are 2 different settings to choose from for the air purifier LEDs.

All Lights Off

This will turn off all LEDs on the air purifier.

Night Light

This will keep the Mood Light on throughout the night.

Mood Light

This will manually turn on/off the Mood Light and provide customized light colors.

Why won't my A3 SPA-1000N respond to the app?

Open tab

Please check to see if the Wireless indicator on the air purifier is on. If not, it means the air purifier is no longer connected to the home wireless network. You may need to reset the router.

If the wireless indicator is on, please make sure the wireless network is connected to the internet as the air purifier needs to connect directly to the cloud for it to work with the app and the device.

MinusA2 SPA-780N

How do I connect my MinusA2 SPA-780N to my home wireless network?

Open tab

Watch the quick pairing video.

  1. You start by downloading the Rabbit Air 2 app from the app store on your Apple or Android device.
  2. Once you have downloaded and installed the app, you can log in using your Rabbit Air account username and password or create a new one.
  3. If this is your first time pairing your device, tap on the next arrow. If you have already installed another air purifier, tap the add button (+) in the upper right-hand corner..
  4. The "Network Check" confirms you have everything needed to pair your air purifier.
  5. Select MinusA2 air purifier.
  6. Enter your air purifier serial number on the sticker on the back of the unit. You can also scan the barcode or the QR code. In some cases, the serial number scan will be bypassed.
  7. Next, pair your air purifier to your home wireless network using the Mobile Setup or WPS method. We recommend Mobile Setup.

    A. Mobile Setup

    1. Press and hold the Speed/Wireless button on your air purifier until the wireless light starts blinking.
    2. Wait 15 seconds or until the wireless light starts to blink slower.
    3. Choose your WiFi network from the list.

    B. WPS Setup

    1. Locate the WPS button on the home wireless router (Typically located on the side or back). Press on the WPS button on the router to activate the router's WPS pairing process.
    2. Press and hold the Speed/Wireless button on your air purifier until the wireless light starts blinking.
  8. The app will try to connect to the air purifier.
  9. To complete setup, put in your air purifier's location and name and establish a connection to your home network.
  10. Select your desired digital skin to help distinguish your purifier
  11. Now you are ready to start using your air purifier through the Rabbit Air App! Please contact Rabbit Air support at 1.888.866.8862 or customerservice@rabbitair.com if there are any issues.

Why can't I find my home wireless network during setup?

Open tab

The SPA-780N currently only supports 2.4Ghz signals. Also, if the router and air purifier are placed too far apart or blocked by thick walls it might affect the signal strength. To avoid these issues, please set up the air purifier closer to the router.

How do I set up a schedule?

Open tab

You can set your air purifier to run on a daily schedule by turning it on the specific schedule. You have a high level of control within the individual schedules and can change the individual hours to a specific fan speed.

*Note the air purifier will turn off "Schedule" if any speed or mode is changed manually either on the app or on the physical device.

Go to your app and tap on the air purifier you want to set the schedule for. Multiple schedules that do not have overlapping times can be used for the same unit.

How does the light control function work?

Open tab

Using the Rabbit Air app, there are 3 different settings to choose from for the air purifier LEDs.

Off

This will turn off all LEDs on the air purifier.

Auto

The mood light and indicators will be controlled by the light sensor on the air purifier. If the room is bright, the LEDs will stay on, but if the room is dark for more than three minutes, they will turn off.

On

This will essentially bypass the light sensor and keep the indicator lights on even when the room is dark.

Am I able to reset my "replace filters" indicator on both my MinusA2 and on my app?

Open tab

Yes! You can reset the indicator on both the app itself and the unit. To reset on the app, select the unit then scroll down to the bottom of your operation screen and press "Reset." On the air purifier, you can reset it by pressing and holding the "Mode/Filter Reset" button for roughly 3 seconds. When resetting the indicator on either the app or the air purifier itself the reset is communicated between each other.

If the WiFi indicator LED is illuminated, please make sure the wireless network is connected to the internet as the air purifier needs to connect directly to the cloud for it to work with the app and the device.

Could I reset my "replace filters" indicator before the red light comes on?

Open tab

You are not able to do so, but we can do it for you!

The "Replace Filters" indicator works as a timer. Every 12 months of operation, the indicator will alert you to replace your filters. The app has a "filter life" bar and gives a countdown as to when the filters need to be replaced. If you replace your filters sooner than 12 months, the app will still show that there is time left before replacing since it is not based on a sensor to detect new filters. In order to reset the filter life, please have your account email address ready and email, call or chat with us so that we may do it for you.

Why won't my MinusA2 SPA-780N respond to the app?

Open tab

Please check to see if the Wireless indicator on the air purifier is on. If not, it means the air purifier is no longer connected to the home wireless network. You may need to reset the router.

If the wireless indicator is on, please make sure the wireless network is connected to the internet as the air purifier needs to connect directly to the cloud for it to work with the app and the device.

Alexa Skill

How do I pair my SPA-1000N or SPA-780N to Alexa?

Open tab
  1. Make sure your unit is connected to the WiFi and the latest version of the Rabbit Air app from App Store or Google Play Store.
  2. On your Alexa app, download and Enable the Rabbit Air skill.
    1. Search for Rabbit Air in the skills tab.
    2. Once it has been downloaded, go to your installed skills.
    3. Tap on the skill and then enable the skill.
    4. Tapping on "Enable to use" will send you over to this page; put in your Rabbit Air account info to help link the account to the skill.
  3. Tap on settings on the skill to make sure it was linked properly.
    1. The Skill Settings page should show in green letters "Linked."
  4. Make sure that your air purifier shows up on your devices tab.
    1. In the list of devices, it should have your Alexa device and your air purifier's name on the list, accompanied by the fan icon.
  5. Once those are set up, you can start using it!
  6. Remember to say the name of the air purifier with the action you want it to make.
    1. Say "Alexa, set bedroom air purifier to Auto-mode."
  7. Enjoy fresh air with a simple command!

Commands to try

Open tab
  • Alexa, turn on (name of air purifier).
  • Alexa, increase fan speed on (name of air purifier).
  • Alexa, set (name of air purifier) to (value between 20-100) percent
  • Alexa, set (name of air purifier) to manual low.
  • Alexa, set mode to pollen on (name of air purifier).
  • Alexa, turn on the mood light on (name of air purifier).
  • Alexa, turn off the negative ions on (name of air purifier).
  • Alexa, what is the air quality on (name of air purifier)?
  • Alexa, turn off all light on (name of air purifier).

Want a command that isn't on this list, check out our Commands page!

What do I do if I say a command and my Alexa is not responding?

Open tab

Make sure you are calling your air purifier by the right name. The Rabbit Air app tells you the name of it. Use the name when saying the command ex. " Alexa, turn on Living Room air purifier."

My Alexa is doing the wrong command!

Open tab

Speak clearly so Alexa can understand! Sometimes if you say something too quickly or too quietly, it will do the correct command or do nothing at all! Also, try out some of our other commands on our Commands page to get the result you want!

My Alexa can't find my air purifier!

Open tab

Check your Alexa app and see if it is connected with the Rabbit Air app. If it is not, link both accounts and then try again!

Do all Rabbit Air purifiers have Alexa compatibility?

Open tab

Our MinusA2 SPA-780N and A3 SPA-1000N models have Alexa compatibility.

Does this work in Canada?

Open tab

As of right now, it is only available to the U.S. We are currently working on rolling it out to Canada at a later date.

Stay in the loop!

Sign up to receive exclusive offers and product updates.

Close (esc)

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Shopping Cart
Your cart is currently empty.
Shop now